1/4" x 50' Small Colored Half-Round Wheel Well Molding for Cars, Trucks, and SUVS (Super White)

Application Procedures 1. The body of the vehicle must be clean and dry to achieve the best adhesion. Clean with 70% Isopropyl Alcohol. 2. The pressure sensitive adhesive on the molding must not be contaminated during the application. 3. The molding must be applied to achieve complete contact (bond) of the adhesive to the vehicle. (i.e. maximum wet-out) 4. Molding adhesion is best when applied at temperatures above 80 degrees Fahrenheit to 110 degrees Fahrenheit. 5. During cold weather, warm molding with a heat gun or heat lamp. Be careful not to damage the surface. 6. Cut molding with an anvil type cutter to proper length. 7. Allow 24 hours for molding to set.

• Color Trim 1/4" Half Round Wheel Well Molding
• This Wheel Well Molding comes in 50 and 200 ft. rolls.
• This Molding is only offered in Black, White, and Silver, however if you are looking for a different color, or size, or style we may be able to get that for you! Just message us!
• This Half Round Wheel Well Molding can be used in vehicles, furniture, spas, tubs and almost any unfinished edge. It comes with a 3M Acrylic Foam Tape for easy, quick installation.